Learn How to Update Firmware of Comfast Dual Band Repeater

Do you have a Comfast dual band repeater in your home? And now experiencing the issues? If your answer is yes, then don’t worry we are here to assist you in no time.

According to a study, Comfast dual band repeater creates issues nowadays related firmware of the device. So, in this blog, we are going to tell you about the entire steps to update the firmware of the Comfast extender. Read on!

Well, before we dive into the process to update the device we would like to tell you about the important things that you required while updating the firmware.

Prerequisites | Comfast Dual Band Repeater Update

Here is the list of important necessities that you need during the process. To get prepared for all these things before the process.

• A good and impeccable internet connection from the ISP side.
• The strong connection between the extender and router.
• Computer or laptop.
• Upgraded internet browser.
• Note down the default web address of the device.
• Administration details.

Comfast Dual Band Repeater Firmware Update

Boot Up Extender

The foremost thing you need to do is gives the fluctuation free power supply by plugging into the working wall outlet.

Connect Extender to Router

Make the reliable and constant connection between the router and extender via Ethernet cable. Ensure that cable you will use is non-damaged.

Turn On the Computer or Laptop

After making the internet connection between the devices, you must turn on the computer or laptop. You can use any one of them according to your comfort. Make sure your device has the latest version of the internet browser for further processing.

Open the Update Internet Browser

Launch the updated web browser on your computer because the outdated browser does not support internet activities properly and also leads the issues.

Note: The web browser you using for the process make sure it is clean from the extra files like cache and cookies because it disturbs the process sometimes.

Access the Default Web Address

Now insert the default web address into the address bar of the browser.

Tip: Do not make typos in the web address entry. Know that putting an incorrect web address in use will produce ambiguous results that have nothing to do with Comfast login portal.

After inserting the URL into the address bar and press the Enter button which redirects you to the login page of the extender.

Log In to Extender

Here, you need to fill the admin details. Do not make the mistake while typing. Otherwise, you will not able to log into the Comfast dual band repeater.

Update the Firmware

Now, you will land on the dashboard of the device in which you have to follow the sub-steps:

• Look for the Menu settings.
• Click on the Advanced settings.
• Select Administration > Firmware Update.

The Comfast Firmware Update panel will open in which you have to follow the on-screen prompts. However, if you interrupt the firmware of the device then maybe you need to reset your device. If you don’t know how to reset Comfast WiFi extender then you can take the help of the user manual.

Conclusion,

This is how you can update the firmware of your Comfast dual band repeater in a hassle-free manner. You just need to perform all the above-mentioned steps carefully and get your device updated.